Output applications
9.3.1
Non-sort/collate/uncollate output to the primary (main)
tray
A machine with finisher FS-503 installed is set to collate output to the primary
(main) tray by default, regardless of whether or not to be equipped with other
optional devices.
Please select an output mode by following the procedures below.
!
Detail
You can change the initial output mode in the Utility setting. For details,
see page 16-39.
For detailed specifications, see "Paper tray/ exit tray capacity" on
page 3-6 and "Finisher FS-503" on page 25-7.
1
Position the original.
2
Touch [Output Appli.] on the Copy screen.
The Output Application screen will be displayed.
Output tray positions are indicated as square marks on the front image
of the machine, and the tray mark currently selected appears
highlighted.
If the primary (main) tray is not selected, touch [Output Tray] to select
it. See page 9-3 for details.
Océ CS620/CS650 Pro
9
9-11