Oce CS620 User Manual page 819

Machine administrator setting
4
Select A4 v/8.5" e11" v paper, then press [START] on the control
panel.
The test chart will be output. The Printer Gamma Offset Automatic
Adjustment screen will be restored.
5
Touch the desired item key to highlight it.
6
Place the test cart on the original glass.
– Place the test chart face down on the original glass with green
arrow pointing at the left side as shown below, and put about 10
sheets of blank copy paper on top of the chart.
Close the ADF/original cover.
7
Touch [Start] on the screen. The machine starts the adjustment
automatically.
The message "Completed" will be displayed.
If an error code (Error 1, 2, or 10) is displayed, check that the test chart
is placed properly.
If any other error code is displayed, please contact your service
representative.
Océ CS620/CS650 Pro
17
17-63