Oce CS620 User Manual page 302

7
4
Adjust the density level of the back side.
– Touch the desired level key from [–1] to [–4] to make the back side
lighter.
– Touch [Standard] if adjustment is not needed.
5
Touch [OK].
The Quality Adjustment screen will be restored.
Do you want to resume the previous setting?
?
% Touch [Cancel].
Do you want to restore the initial setting?
?
% Touch [Default Set].
Do you want to check the adjustment result?
?
% Touch [Adj. Proof Copy] to print a sample copy.
6
Touch [Close] on the Quality Adjustment screen.
The Copy screen will be restored with the [B-Side Prevent] key
displayed and highlighted under the [Quality Adjust.] key.
Use this key to directly jump to the B-Side Prevent screen, if any setting
change is desired.
7-22
Color adjustment
Océ CS620/CS650 Pro