Oce CS620 User Manual page 626

14
4
Load the desired size of paper to be adjusted on a tray, specify
Fold&Staple, then press [Start] on the control panel.
A sample pattern (No. 16) will be output.
5
Check the staple pitch (a) of the sample sheet.
6
If the desired result cannot be obtained, touch [ADJUSTMENT] tab.
The Staple Pitch Adjustment screen will be restored.
7
Display the required size key using up/down arrow keys, and touch it.
8
Use the touch panel keypad to enter the desired adjustment value, then
touch [<<SET].
Available range: -20 (wide) to +20 (narrow), 1 step = 1 mm
9
Repeat the adjustment steps from 3 to 8 until the desired result is
obtained.
14-66
Machine adjustment
Océ CS620/CS650 Pro