Oce CS620 User Manual page 415

Application functions
Setting start number in "Page No."
Touching [Start Number] on the Page No. screen will display the following
screen to allow you to specify the start number and page to be started with
page numbering.
If Chapters is already selected, chapter start number and the chapter to be
started with chapter numbering can also be specified on this screen.
1
Touch [Start Number] under Page No. to highlight it, then use [,] and
[+], or touch panel keypad to enter the desired start number. Up to four
digits can be specified.
2
Touch [Start Page] under Page No. to highlight it, then enter the desired
start page.
3
Touch [Start Number] under Chapter to highlight it, then use [,] and
[+], or touch panel keypad to enter the desired start number. Up to two
digits can be specified.
4
Touch [Start Chapter] under Chapter to highlight it, then enter the
desired start chapter.
5
Touch [OK] to complete the setting and return to the previous screen.
Océ CS620/CS650 Pro
8
8-85