Oce CS620 User Manual page 710

16
04 Reset Setting \ 02 Mode Reset Setting
The following features can be provided by switching the setting.
- Change user
Select whether or not to initialize the settings currently specified when the
machine takes it that the user has changed.
This machine considers the following cases as user change (Change
user):
– When the optional key counter or magnetic card of the data controller is
removed.
– When [Access] is pressed after the User Authentication/ Account Track
setting has one bee performed.
- ADF original direction
Select whether or not to initialize the settings currently specified when the
machine takes it that the original document is loaded into the ADF.
- Reset button function
When the machine is reset, select the copying conditions from the factory
default setting (Full Auto), or Initial Set which is set the desired copy
condition.
For the Full Auto setting, the finisher mode can be changed to [Finisher
Mode by Full-auto] as required.
- Mode memory auto call
Specify the subsequent operation when selecting [Initial] for the Reset
button function. Select [OFF] to reset to the initial setting which has been
specified by selecting [02 User Setting] > [02 Initial Setting] > [01 Copy
Initial setting], or [ON] to use the copy conditions written to Mode
Memory 30 as the initial setting.
- Finisher Mode by Full-auto
Specify the initial setting for the finisher when selecting [Full Auto] in the
Reset button function.
- Initial by Key Counter Insert
Select to reset or not when inserting the key counter or magnetic card of
the data controller.
Status Hold When Auto Reset
-
When Reset functions select to reset the Platen/ADF mode to the initial
setting, or save the previous setting.
- Next Job Staple Setting
Staple mode is automatically canceled after a job is completed with
Staple sort mode On.
- Original Set/Bind Direction
Select to reset or save the original direction setting made on the Special
Original screen and the binding position setting made on the Output
Mode screen after completion of each copying job.
16-18
User setting
Océ CS620/CS650 Pro