8
5
Select the desired numbering type, printing position, character size,
print page, start number, and color.
–
Touch one of the four numbering type keys to highlight it.
–
Touch one of the nine printing position keys to highlight it. If fine
adjustment is desired, touch [Fine Adjustment]. See page 8-83 for
details.
–
Touch [Character Size] to select 20 point or 36 point.
–
Touch [Print Page] to select Cover Only or All Pages.
–
To specify the start number, touch [Start Number]. See page 8-84
for details.
–
For selecting the stamp color, see page 8-88.
6
Touch [OK] twice to complete the setting.
–
To restore the previous setting, touch [Cancel].
–
To release the Stamp/Image Overlay function with the current
setting remained, touch [Function Off].
7
Touch [OK] on the Application screen.
The Copy screen will be restored, with highlighted [Stamp/Overlay] key
displayed under the [Application] key.
Use this key to jump to the subsequent screen to make any setting
change.
8
Enter the desired print quantity from the control panel keypad, then
press [Start].
The machine will start printing when ready for output.
8-74
Application functions
Océ CS620/CS650 Pro