Oce CS620 User Manual page 799

Machine administrator setting
4
Select A3 w/11" e 17" w paper, then press [START].
The sample pattern (No. 16) will be output.
5
Measure the resultant restart timing.
6
If the desired result cannot be obtained, touch the [UTILITY] tab.
The Lead Edge Erase Adjustment screen will be restored.
7
Touch [+ <-> -] to specify the value to be positive or negative.
Use the touch panel keypad to enter the desired adjustment value, then
touch [<<SET].
Available range: -20 to +40, 1 step = 0.1 mm
8
Repeat the adjustment steps from 3 to 7 until the desired result is
obtained.
9
Touch [Return] to restore the Printer Adjustment Menu screen.
10
If further changes are required, touch the desired key.
Océ CS620/CS650 Pro
20
17
17-43