Oce CS620 User Manual page 703

User setting
03 Feed Tray Setting \ 03 ATS Permit Setting
Set ATS On or Off.
1
Follow the procedure on page 16-3 to display the User Setting Menu
screen.
2
Touch [01 System Setting], [03 Feed Tray Setting], and then [03 ATS
Permit Setting].
3
Touch [On] when ATS is used, and [Off] when ATS is not used.
4
Touch [OK] to complete the setting.
– To cancel the change, touch [Cancel].
In either case, the Feed Tray Setting Menu screen will be restored.
5
If further changes are required, touch the desired key.
Océ CS620/CS650 Pro
16
16-11