Oce CS620 User Manual page 105

Preparation for use
Limiting machine usage (Weekly timer)
The Weekly Timer function turns a copier on and off at the time specified by
the administrator.
When a machine is in OFF condition under control of Weekly Timer, the
Power Save LED is lit and machine operation is unavailable.
!
Detail
For details of the Weekly Timer function, see page 17-10.
To use the machine temporarily
The following procedure temporarily enables the machine operation. (Timer
Interrupt)
0 The Timer Interrupt password is to be specified in the administrator
setting. Ask your administrator for the password.
0 You cannot specify the copy time shorter than 5 minutes; entering 0 for
hour and a number smaller than 5 for minute will set the minute at 5.
Also, a number larger than 60 is unavailable for minute.
1
Press [Power Save] on the control
panel.
The Machine Status screen will be
displayed along with the message
shown below.
Timer interrupt mode
Enter password $###
The machine power will be turned off
automatically after 5 minutes from this state if a password is not
entered.
Or, if the following message is displayed, proceed to step 3.
Input desired copy time
$ hour(s) $# minute(s)
2
Enter the Timer Interrupt password, then press [Start].
– Enter a 4-digit Timer Interrupt password using the control panel
keypad, then press [Start].
Do you want to correct an invalid password?
?
% Continue by entering the valid 4-digit password.
Océ CS620/CS650 Pro
2
2-31