Oce CS620 User Manual page 266

6
– To set the desired custom size:
(1) Touch [Size Setting], then touch [Custom].
(2) Select the lengthwise/widthwise dimension key to highlight it,
then use [+], [,], or touch screen keypad to enter the desired
special size.
Entered size should fall within 140 - 330 mm in lengthwise
dimension, 182 - 487 mm in widthwise dimension.
(3) Similarly, touch the trimming width key to highlight it, then enter
the desired amount. With the Trimming mode selected, the
machine will output printed sets trimmed by the specified amount.
Entered amount should fall within 1 - 40 mm.
(4) Touch [Lead Edge], [Rear Edge], or [Center] to specify the
desired image position.
(5) Touch [OK] to complete the setting and return to the Paper
Setting screen.
Touching [Fix] will complete the setting and directly return to the
Copy screen.
6-56
Basic job settings
Océ CS620/CS650 Pro