Oce CS620 User Manual page 596

14
4
Touch [COPY] tab.
The Copy screen will be displayed.
5
Load the desired size of paper to be adjusted on a tray, specify Punch,
then press [Start] on the control panel.
A sample pattern (No. 16) will be output.
6
Check the distance (a) from the edge of the feeding sheet to the center
position of the punch hole.
7
If the desired result cannot be obtained, touch [ADJUSTMENT] tab.
The Paper Width Adjustment screen will be restored.
14-36
Machine adjustment
Océ CS620/CS650 Pro