Oce CS620 User Manual page 575

Machine adjustment
4
Select A3 w/11" e 17" w paper, place the original of which a
misalignment can be easily monitored on the original glass, then press
[START].
5
Check the misalignment by comparing the original and the output.
6
If the desired result cannot be obtained, touch the [ADJUSTMENT] tab.
The Scanner Restart Timing Adjustment screen will be restored.
7
Use the touch panel keypad to enter the desired adjustment value, then
touch [<<SET].
Available range: -10 to +20, 1 step = 0.1 mm
8
Repeat the adjustment steps from 3 to 7 until the desired result is
obtained.
9
Touch [Return] to restore the Adjustment Menu screen.
Océ CS620/CS650 Pro
14
14-15