4. SETUP AND PROCEDURES PRIOR TO OPERATION
4.5 Names of Parts
No.
1)
2)
3)
4)
LED Name
RUN
BSY.
NOM.
ERR.
EXT.PW
4 - 4
The following describes the names of the parts of the RFID interface module.
1)
2)
3)
4)
Name
LED display
Test switch
Antenna connector
Power supply terminal
(1) LED list
Display Details
Indicates normal operation.
Indicates the operating status of
each channel.
Indicates the communication
completion status of each channel.
Indicates whether or not an error
exists on each channel.
Indicates the status of the power
supply to the antenna.
Indicates the operating status of the RFID interface module.
[For display details, refer to Section (1).]
Used to switch between RUN mode and TEST mode.
A connector for antenna connection.
A terminal for 24VDC power supply connection.
Normal
Running
Normal completion
Error
Normal
1)
2)
3)
4)
Description
:On
Abnormal
Waiting
Waiting or abnormal
completion
Normal
Abnormal
:Off
4 - 4