Mitsubishi MELSEC-Q EQ-V680D1 User Manual page 102

6. HOW TO COMMUNICATE WITH ID TAGS
6.4.5 Clear bit
6 - 34
The Clear Bit program is a program for clearing the specified bits of the data of an ID
tag to "0".
(1) Program conditions
(a) Setting contents
Intelligent Function
Module Device
Address
Command code specification
U0 \ G0
area (CH1)
Head address specification
U0 \ G3
area (CH1)
Number of processed points
U0 \ G4
specification area (CH1)
(b) Devices used by user
1. External inputs (commands/data)
Device
M1040 Clear Bit of ID Tag command
M1041 Clear Bit of ID Tag result reception
M1042 Cancel Clear Bit of ID Tag command
D3410 to D3411 Specifies the data of the ID Tag for which bits are to be cleared.
2. External outputs (verification)
Device
M1043 Normal completion during Clear Bit of ID Tag
M1044 Module error during Clear Bit of ID Tag
M1045 ID communication complete during Clear Bit of ID Tag
D1040 Error details storage during Clear Bit of ID Tag
Buffer Memory Name
Application
Application
Setting Contents
H3 (Clear bit)
K10 (Address: 10)
K4 (4 bytes)
6 - 34