6. HOW TO COMMUNICATE WITH ID TAGS
6.4.4 Set bit
6 - 31
The Set Bit program is a program for setting the specified bits of the data of an ID tag
to "1".
(1) Program conditions
(a) Setting contents
Intelligent Function
Module Device
Address
Command code specification
U0 \ G0
area (CH1)
Head address specification
U0 \ G3
area (CH1)
Number of processed points
U0 \ G4
specification area (CH1)
(b) Devices used by user
1. External inputs (commands/data)
Device
M1030
Set Bit of ID Tag command
M1031
Set Bit of ID Tag result reception
M1032
Cancel Set Bit of ID Tag command
D3400 to D3401
Specifies the data of the ID Tag for which bits are to be set.
2. External outputs (verification)
Device
M1033
Normal completion during Set Bit of ID Tag
M1034
Module error during Set Bit of ID Tag
M1035
ID communication complete during Set Bit of ID Tag
D1030
Error details storage during Set Bit of ID Tag
Buffer Memory Name
Application
Application
Setting Contents
H2 (Set bit)
K10 (Address: 10)
K4 (4 bytes)
6 - 31