Mitsubishi MELSEC-Q EQ-V680D1 User Manual page 115

6. HOW TO COMMUNICATE WITH ID TAGS
6.4.9 Check data
6 - 47
The Check Data program is a program for checking if an error occurred in the data of
an ID tag. The program writes data and data check code to the ID tag.
(1) Program conditions
(a) Setting contents
Intelligent Function
Module Device
Address
Command code specification
U0 \ G0
area (CH1)
Head address specification
U0 \ G3
area (CH1)
Number of processed points
U0 \ G4
specification area (CH1)
(b) Devices used by user
1. External inputs (commands/data)
Device
M1080 Check Data of ID Tag command
M1081 Cancel Check Data of ID Tag command
2. External outputs (verification)
Device
M1082 Normal completion during Check Data of ID Tag
M1083 Module error during Check Data of ID Tag
D1080 Error details storage during Check Data of ID Tag
Buffer Memory Name
Application
Application
Setting Contents
H7 (Check Data)
K10 (Address: 0)
K10 (10 bytes)
6 - 47