Mitsubishi MELSEC-Q EQ-V680D1 User Manual page 96

6. HOW TO COMMUNICATE WITH ID TAGS
6.4.3 Write
6 - 28
The Write program is a program for writing data to an ID tag.
(1) Program conditions
(a) Setting contents
Intelligent Function
Module Device
Address
Command code specification
U0 \ G0
area (CH1)
Head address specification
U0 \ G3
area (CH1)
Number of processed points
U0 \ G4
specification area (CH1)
(b) Devices used by user
1. External inputs (commands/data)
Device
M1020 Write to ID Tag command
M1021 Write to ID Tag result reception
M1022 Cancel Write to ID Tag command
D2300 to D2303 Specifies the data to be written to the ID tag during Write to ID Tag
2. External outputs (verification)
Device
M1023 Normal completion during Write to ID Tag
M1024 Module error during Write to ID Tag
M1025 ID communication complete during Write to ID Tag
D1020 Error details storage during Write to ID Tag
Buffer Memory Name
Application
Application
Setting Contents
H1 (Write)
K10 (Address: 10)
K8 (8 bytes)
6 - 28