Mitsubishi MELSEC-Q EQ-V680D1 User Manual page 118

6. HOW TO COMMUNICATE WITH ID TAGS
6.4.10 Control number of writes
6 - 50
The Control Number of Writes program is a program for writing to an ID tag the number
of writes to EEPROM-type ID tags, and assessing whether or not the number of writes
of the ID tag has been exceeded.
(1) Program conditions
(a) Setting contents
Intelligent Function
Module Device
Address
Command code specification
U0 \ G0
area (CH1)
Head address specification
U0 \ G3
area (CH1)
Command option specification
U0 \ G5
area (CH1)
(b) Devices used by user
1. External inputs (commands/data)
Device
M1090 Control Number of Writes of ID Tag command
M1091 Cancel Control Number of Writes of ID Tag command
2. External outputs (verification)
Device
M1092 Normal completion during Control Number of Writes of ID Tag
M1093 Module error during Control Number of Writes of ID Tag
D1090 Error details storage during Control Number of Writes of ID Tag
Number of writes calculation result storage during Control Number of
D1091 to D1092
Writes of ID Tag
Buffer Memory Name
Application
Application
Setting Contents
H8 (Control Number of Writes)
K10 (Address: 10)
K5 (Number of times added: 5)
6 - 50