Mitsubishi MELSEC-Q EQ-V680D1 User Manual page 15

2. SYSTEM CONFIGURATION
Mountable CPU Module
CPU Type
2
Universal
Programmable
model CPU
controller CPU
Safety CPU
C-language controller module
2 - 2
Table 2.1 Application system (Continued)
Mountable Quantity*
CPU Model
Q03UDECPU
Q04UDEHCPU
Q06UDEHCPU
Q10UDEHCPU 64, maximum
Q13UDEHCPU
Q20UDEHCPU
Q26UDEHCPU
QS001CPU Not mountable
Q06CCPU-V-H01
Q06CCPU-V
Not mountable
Q06CCPU-V-B
Q12DCCPU-V
*1. Limited to within the range of the number of IO points of the CPU module.
*2. Mountable in any IO slot of a mountable base unit.
*3. An extension base unit cannot be connected to a safety CPU.
(b) Mounting to a MELSECNET/H remote I/O station
The table below shows the network modules and base units applicable to the
RFID interface module and quantities for each network module model.
Depending on the combination with other modules or the number of mounted
modules, power supply capacity may be insufficient.
Pay attention to the power supply capacity before mounting modules, and if the
power supply capacity is insufficient, change the combination of the modules.
Applicable network
No. of modules*
module
QJ72LP25-25
QJ72LP25G
QJ72LP25GE
QJ72BR15
*1. Limited within the range of I/O points for network module.
*2. Can be installed to any I/O slot of a base unit.
1
Main Base Unit
1
Main base unit of
remote I/O station
○
Up to 64
2
Mountable Base Unit*
Extension Base Unit
○ ○
3
× ×
*
× ×
○ ×
:Mountable, :Not mountable
2
Base unit*
Extension base unit of
remote I/O station
○
○
:Applicable,
×
:N/A
2 - 2