Mitsubishi MELSEC-Q EQ-V680D1 User Manual page 149

6. HOW TO COMMUNICATE WITH ID TAGS
X1000 X1004
M3000
X1005
K0
ZP.REMFR
K1 ZP.REMFR
X1162
X1164
X1166
* In the case of communication specification which are trigger, auto, FIFO trigger.
X1004 M1164
X1005 M1166
* In the case of communication specification which are repeat auto, FIFO repeat, multi-trigger and multi-repeat.
X1004
Add the processing of the read data at here.
* In the case of communication specification which are repeat auto, FIFO repeat and multi-repeat, turn on M1161.
X1002
X1005 M1166
M1161 X1004
6 - 81
"J1" K1 K1
"J1" K1 K1
SET
SET
H0 K100 D1000 K4
H0 K41 D1200 K1
RST
RST
RST
K0
Set the device during the
M3000
ch1 use of the dedicated
instructions.
K1
Set the device during the
M3000
ch1 use of the dedicated
instructions.
Read the reading data
from the buffer memory
M1164
of the RFID module of
remote I/O station.
Read the error code from
the buffer memory of the
M1166
RFID module of remote
I/O station.
Reset the device during
M3000
the ch1 use of the
dedicated instructions.
Reset an ID command
Y1014
execution request
switch.
Reset the read
M1160
ID Tag command
Require communication
Y1016
with the next ID tag.
Reset an ID command
RST Y1014
execution request
switch.
Reset the read
RST M1160
ID tag command.
6 - 81