Configuring Ptz Settings - HIKVISION DS-7300HI-ST Series User Manual

User Manual of DS-7300HI/7300HFI/8100HDI-ST Series DVR

4.1 Configuring PTZ Settings

Purpose:
Follow the procedure to set the parameters for PTZ. The configuring of the PTZ parameters should be done before
you set the PTZ camera.
Before you start:
Check that the PTZ and the DVR are connected properly through RS-485 interface.
Steps:
1. Enter the PTZ Settings interface.
Menu >Camera> PTZ
2. Choose the camera for PTZ setting next to Camera label.
3. Enter the parameters of the PTZ camera.
Note: All the parameters should be exactly the same as the PTZ camera parameters.
4. Click Copy if you want to configure same settings to other PTZ cameras.
5. Click Apply button to save settings.
Figure 4.1 PTZ- General
44