Combination Mode - Korg Oasys Operation Manual

1. Operate the sliders and switches to edit the values
saved in the program.
2. Hold down the RESET CONTROLS switch, and
operate the slider or switch that you want to
restore.
The selected slider or switch will return to its stored
setting.
Restoring all scene settings
1. In each scene, operate the sliders and switches to
edit the values saved in the program.
2. Hold down the RESET CONTROLS switch, and
press the MODULE CONTROL switch.
All scenes will return to their stored settings.
If you've used the RESET CONTROLS switch to
return all scenes to their original setting, there is no
way to return to the edited settings of step 1.
Resetting the REALTIME CONTROL knob settings for
all scenes
1. Use the REALTIME CONTROL knobs to edit the
sound of the program, and use the sliders and
switches to modify the saved settings in each
scene.
2. Hold down the RESET CONTROLS switch, and
press the CONTROL ASSIGN R.TIME
KNOBS/KARMA switch.
The Real‐Time Controls knob settings will be reset
(to the center value of 064), and the settings of all
scenes will return to their stored settings.
If you've used the RESET CONTROLS switch to
reset the Real‐Time Controls knobs and to return all
scenes to their saved setting, there is no way to
return to the edited settings of step 1.
Selecting a GE (Generated Effect)
When the KARMA function is on, the KARMA module
uses a GE to generate phrases or patterns. The OASYS
provides a wide range of GEs that you can use for a
variety of instruments, playing techniques, and
musical styles (See "The structure of the KARMA
function" on page 197).
For each of the pre‐loaded programs, a GE that's
appropriate for the sound of the program is already
selected. If you switch to a different GE, the generated
phrase or pattern will change dramatically.
1. Access the Program P0: Play– KARMA GE page.
Overview - What is KARMA?
2. In the display, press the "GE Select" popup button
to access the "GE Select" menu.
3. Select a GE from the list in the right side of the
display.
The selected GE will be highlighted and will
become active.
If you now play the keyboard, this GE will generate
a phrase or pattern.
While this menu is displayed, you can select and
play these GEs without pressing the OK button.
4. If you are satisfied with the program you selected,
press the OK button to close the menu.
Alternatively, you can select a GE by choosing "GE
Select" in the display, and operating the VALUE
slider or VALUE dial. You can also use "GE
Category Select" to choose a GE by category. (See
"GE Category Select" on page 8 of the Parameter
Guide.)
Editing KARMA module parameters
For details on editing the parameters of a KARMA
module, see "KARMA function settings" on page 206.
Performing with the KARMA function in

Combination mode

In Combination mode, up to four KARMA modules
can be operating simultaneously. You can use the four
KARMA modules together with the sixteen timbre
programs in a wide variety of ways, for example by
using them to independently play phrases and
patterns for separate programs such as drums, bass,
guitar, and strings.
Selecting a combination and turning the
KARMA function on/off
1. Press the COMBI switch to enter Combination
mode, and select the desired combination. (See
"Selecting combinations" on page 3.)
Performing with KARMA
203