Introduction to OASYS
Storage expansion via USB 2.0
Four USB 2.0 connectors are built‐in, making it easy to
expand your storage via external hard disks,
removable disks, flash media, and so on.
The OASYS' expandability
The OASYS uses an open architecture that allows it to
be expanded without adding hardware.
The EXs series of high‐capacity PCM library data that
takes full advantage of the PCM synthesis engine, the
EXi series which adds new synthesis engines that are
organically integrated into the entire system, and the
EXf series which adds new plug‐in effects.
An ADAT optical output jack and word clock input
jack can be added by installing the optional EXB‐DI
(hardware). This sends the eight channels of the analog
audio output jacks (INDIVIDUAL 1–8) via ADAT
optical format channels 1‐8 as 24‐bit 48 kHz digital
signals. (You can make settings within the OASYS so
that the MAIN L/MONO and R output is assigned to
INDIVIDUAL 1–8.) This option also lets you use the
word clock input jack to synchronize the OASYS with a
connected digital audio device.