Appendices
Are you using the recommended media for your drive?
If you are writing from an external USB drive to CD‐
R/RW, it is possible that the transfer speed is
insufficient.
• Writing may be successful if you lower the writing
speed.
• Writing may be successful if you first copy the data
from the external USB drive to the internal hard
disk, and then execute the writing operation from
the internal hard disk.
Are you using blank media?
• If using CD‐R, please use new media. If using CD‐
RW, use the page menu command Erase CD‐RW
(Disk– Make Audio CD) to erase the contents of the
media before you execute Save.
An OASYS CD-R/RW is not recognized by an
external device
A CD‐R/RW saved or copied on the OASYS using
packet writing is not recognized on a computer.
• If you install a UDF version 1.5 compatible UDF
reader or packet writing software on your
computer, it will be possible to recognize the disc.
• In the case of a CD‐R, it may be possible to make
the disc be recognized by executing the page menu
command Convert to ISO9660 Format (Disk–
Utility page) to convert the disc to ISO9660 format.
However depending on the state in which the disc
was saved, it may be converted into ISO9660 level 3
format, and may still not be recognized. In this case
if you install ISO9660 level 3 compatible reader
software or packet writing software on your
computer, it will be possible to recognize the disc.
A CD‐R/RW that was saved or copied on the OASYS
using packet writing is not recognized by the
TRITON/TRITON pro/TRITON proX/ TRITON‐
Rack/TRITON Le.
• These models do not support UDF version 1.5, and
therefore will not recognize such a disc.
• In the case of a CD‐R, it may be possible to make
the disc be recognized by executing the page menu
command Convert to ISO9660 Format (Disk–
Utility page) to convert the disc to ISO9660 format.
However depending on the state in which the disc
was saved, it may be converted into ISO9660 level 3
format, and may still not be recognized.
Other problems
Fan operating noise increases or changes
This is not a malfunction. The OASYS' cooling system
fan is controlled by a temperature sensor and a
program. The speed of the fan will change according to
the surrounding temperatures and the operational
state.
226
Can't write audio tracks
Additional writing is not possible on a CD‐R/RW disc
that has been finalized.
Can't play back the disc on an audio CD player
Did you finalize the disc?
• If you want to finalize the disc after writing
additional data, check the Execute finalize too
check box when executing the page menu
command "Write to CD" (Disk– Make Audio CD),
so that the disc will be finalized. For more
information, see "Write to CD" on page 784 of the
Parameter Guide.
• If you only want to finalize the disc, select the page
menu command Finalize Audio CD (Disk– Make
Audio CD), and press the OK button to finalize the
disc. For more information, see "Finalize Audio
CD" on page 784 of the Parameter Guide.
Are you using CD‐R media?
• Since some CD players are unable to play CD‐RW
media, we recommend that you use CD‐R media.
Have you tried using a different type of media?
• Some CD‐R/RW media cannot be played by some
CD players. You may be able to play back
successfully by using a different type (brand) of
CD‐R/RW media.
WAVE files
Can't load
Is the WAVE file in a format that the OASYS can load?
• Only 48 kHz or 44.1 kHz WAVE files can be
inserted into the Track CD List in the Disk mode
Make Audio CD page.
• In Sequencer mode, only monaural 48 kHz WAVE
files can be inserted into an audio track.
Can't preview
Is the WAVE file in a format that the OASYS can load?
• Only 48 kHz WAVE file data can be previewed by
pressing the Play button in the directory window.
• You can't preview if the name of the WAVE file on
external media is longer than eight characters. Copy
the file to the internal hard disk before you preview
it.
Power turns off automatically
The openings on the left and right sides are cooling
vents. Be sure to place the unit so that the sides are at
least 10 cm from a wall or similar object that might
block them, and do not place any obstructing object
near the cooling vents. If the OASYS is not cooled
adequately, the internal temperature will rise. The
power supply may shut down automatically to protect
the device from high temperatures.