The OASYS contains an amazing amount of
functionality. This Quick Start is provided for those
who just want to get started trying out the sounds right
1. Connect the OASYS to your mixer or monitor
Connect the OASYS' AUDIO OUTPUT (MAIN)
L/MONO and R jacks to your mixer or amplified
If you're monitoring through headphones, connect
them to the headphone jack located on the left front of
the OASYS. The headphones will output the same
sound as the AUDIO OUTPUT (MAIN) L/MONO and
Playing Programs and Combinations
With the factory settings, Combination mode will be
selected when you turn on the power.
Play the keyboard, and you will hear the sound of
bank INT‐A Combination number 000.
A Combination consists of up to sixteen Programs that
are split and/or layered. It also uses up to four KARMA
modules simultaneously (a Program can use only one
KARMA module), letting you produce far more
complex sounds than a Program.
Although you could simply continue selecting
different Combinations and playing them, let's start by
selecting and listening to the "basic" sounds of the
AUDIO OUTPUT (MAIN) L/MONO, R
It explains how to set up the OASYS, how to select
Programs and control the sound, how to listen to the
demo songs, and the new features of the latest software
2. Connect the power cable.
First connect the included power cable to the OASYS'
power connector, and then to the power outlet.
3. Lower the OASYS's front‐panel VOLUME slider.
4. Turn on the power switch.
Press the rear panel POWER switch to turn on the
power. Wait until the startup screen has finished being
5. Play the keyboard, and gradually raise the
VOLUME slider to an appropriate level.
Selecting Programs by bank and number
1. Press the MODE PROGRAM switch (the LED will
light) to enter Program mode.
The upper left of the LCD screen shows the name of
the current page, PROGRAM P0: Play. This is the page
in which you will normally play Programs.