Introduction to OASYS
The maximum polyphony may also depend on various
other parameters; for more information, see "A note
about polyphony" on page 33 of the Parameter Guide.
After you've turned on the OASYS, here's how to
perform basic operations such as selecting modes and
1. Selecting modes
In order to use a particular function on the OASYS, you
must first select the appropriate mode.
Press one of the front panel mode buttons (COMBI,
PROGRAM, SEQ, SAMPLING, GLOBAL, or DISK)
to enter the corresponding mode.
PROGRAM switch: Program mode
SAMPLING switch: Sampling mode
2. Selecting pages
Each mode has a large number of parameters, which
are grouped into pages. These are further subdivided
by tabs into up to nine tab pages.
1. Make sure that the desired mode is selected.
To select a mode, press the appropriate mode key
(COMBI switch – DISK switch).
Free for Voices
Here we will use Program mode as an example for our
explanation. Press the PROGRAM switch.
2. Press a tab in the lower line (page group tabs).
As an example here, press the Basic/Vector tab. The
current page indication in the upper left of the LCD
screen will indicate "PROGRAM P1: Basic/Vector,"
and the page group will change.
When you press the EXIT switch, you will return to P0
from any page.