Installing The Device Driver; Device Driver Installation (For Any Model Other Than Primergy Ft) - Fujitsu PRIMERGY LTO4 User Manual

3.3

Installing the Device Driver

If using this product on Windows Server 2003, install the device driver according to the following
procedure using the driver floppy disk provided with this product.
For Windows Server 2008 and Linux, installing the device driver is not required.
Refer to the SAS card's manual to install the SAS card driver that is to be connected
to this product.
3.3.1 Device Driver Installation (For Any Model Other
than PRIMERGY FT)
1
Log on to the Windows with administrator privileges.
2
Click the [Start] button – [Control Panel] – [System].
3
Select the [Hardware] tab and click [Device Manager].
4
Double-click [Other devices], and then double-click [QUANTUM
ULTRIUM 4 SCSI Sequential Device].
5
Select the [Driver] tab and click [Update Driver].
The "Welcome to the Hardware Update Wizard" message appears.
6
When the "Can Windows connect to Windows Update to search for
software?" message appears, click [No, not this time] and then
click [Next >].
7
Click [Install from a list or a specific location] and click [Next >].
8
Click [Search for the best driver in these locations].
9
Check [Include this location in the search], and press the
[Browse] button to specify the folder which restored the device
driver in the copy source.
• When using the supplied driver floppy disk
(or when the downloaded device driver was restored to a floppy disk)
A:\LTO4HH
• When using a DVD such as the PRIMERGY Startup Disc
[CD/DVD drive]:\DRIVERS\tape\LTO4HH
10
Click [Next].
The "Completing the Hardware Update Wizard" message appears.
3 How to Install and Introduce this Product to the Server
E
69