PRINTER AND P/S OPTIONS
Paper Sensor Installation
B654I903.WMF
NOTE: Install the paper sensor only if the optional Bridge Unit has been installed.
If the bridge unit is not installed, install the Paper Limit Sensor Installation
(previous page).
1. Remove the connector cover [A] and bridge unit [B] (
2. Open the right cover [C] of the bridge unit and peel off the black tape [D]
3. Pull out the connector [E].
4. Install the paper sensor [F] (
D315
CÓPIA NÃO CONTROLADA
[A]
[B]
[D]
x 1,
x 1) then reinstall the bridge unit.
10
CÓPIA NÃO CONTROLADA
[F]
[E]
x 2,
x 2).
[C]
B654I904.WMF
SM