Ricoh B291 Service Manual page 324

SERVICE PROGRAM MODE TABLES
5860 SMTP/POP3/IMAP4
5860 20 Partial Mail Receive Timeout
[1~168/72/1]
Sets the amount of time to wait before saving a mail that breaks up during reception.
The received mail is discarded if the remaining portion of the mail is not received
during this prescribed time.
5860 21 MDN Response RFC2298Compliance
Determines whether RFC2298compliance is switched on for MDN reply mail.
[0~1/1]
0: No
1: Yes
5860 22 SMTP Auth. From Field Replacement
Determines whether the FROM item of the mail header is switched to the validated
account after the SMTP server is validated.
[0~1/1]
0: No. "From" item not switched.
1: Yes. "From" item switched.
5860 25 SMTP Auth Direct Sending
Occasionally, all SMTP certifications may fail with SP5860 006 set to "2" to enable
encryption during SMTP certification for the SMTP server. This can occur if the SMTP
server does not meet RFC standards. In such cases you can use this SP to set the
SMTP certification method directly. However, this SP can be used only after SP5860
003 has been set to "1" (On).
Bit0: LOGIN
Bit1: PLAIN
Bit2: CRAM_MD5
Bit3: DIGEST_MD5
Bit4 to Bit 7: Not Used
5866 Email Date Field DFU
5866 5 Add Date Field
This SP code adds the current date to the date field of an email alert that informs
the operator that an error has occurred.
[0~1/0/1]
0: Date not added
1: Date added
Log Format
5866 100
This SP sets the output level for the MIRS module (Machine Information Report
Service).
5870 Common Key Info Writing
Writes to flash ROM the common proof for validating the device for NRS
specifications.
5870 1 Writing
5870 3 Initialize
B291/B295/B296/B297
CÓPIA NÃO CONTROLADA
Note: These SPs are for future use and currently are not used.
5-64
CÓPIA NÃO CONTROLADA
SM