Input Check; Main Machine Input Check: Sp5-803 - Ricoh B291 Service Manual

5.2.5 INPUT CHECK

Main Machine Input Check: SP5-803

1. Enter the SP mode and select SP5-803.
2. Enter the number (1 – 13) for the item that you want to check. A small box will
be displayed on the SP mode screen with a series of 0's and 1's.
The meaning of the display is as follows.
0 0 0 0 0 0 0 0
Bit 7 6 5 4 3 2 1 0
3. Check the status of each item against the corresponding bit numbers listed in
the table below.
Number Bit
7
6
5
1: Paper Feed 1 4
(Upper Tray)
3
2
1
0
7
6
5
2: Paper Feed 2 4
(Lower Tray)
3
2
1
0
7
6
5
3: Registration 4
and Others
3
2
1
0
SM
CÓPIA NÃO CONTROLADA
Description
Fusing Exit Sensor
Near End Sensor 2
Near End Sensor 1
Not Used
Paper Size Sensor 4
Paper Size Sensor 3
Paper Size Sensor 2
Paper Size Sensor 1
Duplex Unit Set Sensor
Near End Sensor 2
Near End Sensor 1
Fusing/Paper Output Motor Lock
Paper Size Sensor 4
Paper Size Sensor 3
Paper Size Sensor 2
Paper Size Sensor 1
Zero Cross Signal
Transfer Belt Unit HP Sensor
Exhaust Fan Lock Signal
Cooling Fan Lock Signal
Main Motor Lock Signal
Toner Overflow Sensor
Cover Open
Registration Sensor
5-111
CÓPIA NÃO CONTROLADA
SERVICE PROGRAM MODE TABLES
Reading
0
Activated Deactivated
Activated Deactivated
Activated Deactivated
--- ---
Activated Deactivated
Activated Deactivated
Activated Deactivated
Activated Deactivated
Unit set Unit not set
Off On
Off On
Not Locked Locked
Activated Deactivated
Activated Deactivated
Activated Deactivated
Activated Deactivated
Detected Not detected
Not present Present
Not locked Locked
Not locked Locked
Not locked Locked
Tank not full Tank full
Cover closed Cover opened
Paper detected Paper not detected
B291/B295/B296/B297
1