Ricoh B291 Service Manual page 794

BIT SWITCHES
Printer Switch 03
No FUNCTION
0
Length reduction of received
data
0: Disabled
1: Enabled
1-3 Not used
4 Page separation setting when
to sub scan compression is
7 forbidden
00-0F (0-15 mm: Hex)
Default: 6 mm
Printer Switch 04
No FUNCTION
0 Maximum reducible length when length reduction is enabled with switch 03-0 above.
to <Maximum reducible length> = <Paper length> + (N x 5mm)
4 "N" is the decimal value of the binary setting of bits 0 to 4.
Bit 4 3 2 1 0 Setting
0 0 0 0 0 0 mm
0 0 0 0 1 5 mm
0 0 1 0 0 20 mm (default setting)
1 1 1 1 1 155 mm
For A5 sideways and B5 sideways paper
<Maximum reducible length> = <Paper length> + 0.75 x (N x 5mm)
5 Length of the duplicated image on the next page, when page separation has taken
6 place.
  
0 1
  =    
4 mm,
0 0
  
7 Not used.
B779
CÓPIA NÃO CONTROLADA
0: Incoming pages are printed without length
reduction.
(Page separation threshold: Printer Switch 03, bits 4
to 7)
1: Incoming page length is reduced when printing.
(Maximum reducible length: Printer Switches 04,
bits 0 to 4)
Do not change the settings
Page separation threshold (with reduction disabled
with switch 03-0 above).
For example, if this setting is set to "10", and A4 is
the selected paper size:
• If the received document is 10 mm or less longer
• If the received document is 10 mm longer than
  
0
=     =  
10 mm, 15 mm,
1
  
Do not change the setting.
CÓPIA NÃO CONTROLADA
COMMENTS
than A4, then the 10 mm are cut and only 1 page
prints.
A4, then the document is split into 2 pages.
COMMENTS
 
1
  =  
Not used
1
 
56
SP No. 1-103-004
SP No. 1-103-005
SM