Ricoh B291 Service Manual page 42

MAIN MACHINE INSTALLATION
[A]
12. Remove the development roller unit [A], and set it on the paper.
13. Pour the developer [B] into the development unit.
NOTE: The developer lot number is embossed on the end of the developer
package. Do not discard the package until you have recorded the lot
number. (!1-16)
1) Pour approximately 1/3 of the developer evenly along the length of the
development unit.
2) Rotate the drive gear [C] to work the developer into the unit.
3) Repeat until all the developer is in the development unit.
4) Continue to turn the drive gear until the developer is even with the top of the
unit.
14. Reassemble the development unit.
NOTE: Make sure that the earth plate [D] is positioned correctly.
15. Re-install the development unit and PCU.
B291/B295/B296/B297
CÓPIA NÃO CONTROLADA
B135I106.WMF
[D]
B195I019.WMF
1-12
CÓPIA NÃO CONTROLADA
[B]
[C]
B135I513.WMF
SM