Ricoh B291 Service Manual page 841

6800D8(H) - User parameter switch 08 (SWUSR_08)
Bits 0 and 1: Not used.
Bit 2: Authorized reception
0: Only faxes from senders whose RTIs/CSIs are specified for this feature
are accepted.
1: Only faxes from senders whose RTIs/CSIs are not specified for this feature
are accepted.
Bits 3 to 7: Not used.
6800D9(H) - User parameter switch 09 (SWUSR_09) : Not used
6800DA(H) - User parameter switch 10 (SWUSR_0A)
Bit 0: Not used
Bit 1: 2 into 1 0: Off, 1: On
Bit 2: Not used
Bit 3: Page reduction 0: Off, 1: On
Bit 4: Not used
Bit 5: Reception file printout 0: Disabled, 1: Enabled
Bit 6: Use both e-mail notification and printed reports to confirm the transmission
results 0: Off, 1: On
6800DB(H) - User parameter switch 11 (SWUSR_0B)
Bit 0: Not used
Bit 1: Not used
Bits 2 to 5: Not used
Bit 6: Printout of messages received while acting as a forwarding station
0: Off, 1: On
Bit 7: Polling Standby duration 0: Once, 1: No limit
6800DC(H) - User parameter switch 12 (SWUSR_0C): Not used
6800DD(H) - User parameter switch 13 (SWUSR_0D): Not used
6800DE(H) - User parameter switch 14 (SWUSR_0E)
Bit 0: Message printout while the machine is in Night Printing mode 0: On, 1: Off
Bit 1: Maximum document length detection
0: Double letter, 1: Longer than double-letter (well log) – up to 1,200 mm
Bit 2: Batch transmission 0: Off, 1: On
Bit 3: Fax mode settings, such as resolution, before a mode key (Copy/Fax/Printer
/Scanner) is pressed
0: Not cleared, 1: Cleared
Bits 4 to 6: Not used
Bit 7: Manual service call (sends the system parameter list to the service station)
0: Off, 1: On
SM
CÓPIA NÃO CONTROLADA
103
CÓPIA NÃO CONTROLADA
SERVICE RAM ADDRESSES
B779