Ricoh B291 Service Manual page 704

ADJUSTMENT
Adjust towards the leading edge
L
Dip switch 1 -6, -7, -8 setting
-6
OFF
OFF
OFF
OFF
ON
ON
ON
ON
8. Measure the distance (L) between the stapling position and the folder position.
9. Adjust the stapling position with dip switches 1 -6, -7, -8.
Inputting a lower value than the current setting moves the stapling position
towards the leading edge. Adjusting by 1 step moves the stapling position 0.25
mm.
Example 1:
To move the stapling position 1 mm towards the leading edge.
If dip switch 1 is currently set to +2, set the dip switch to reflect -2 (this moves
the stapling position 4 steps towards the leading edge).
Example 2:
To move the stapling position 0.75 mm away from the leading edge.
If dip switch 1 is currently set to -1, set the dip switch to reflect +2 (this move,s
the stapling position 3 steps away from the leading edge).
10. Turn off dip switched 1-1 and -2, then turn off the copier main switch.
B546
CÓPIA NÃO CONTROLADA
Mark
Folding Position
Stapling Position
Example 1: L= 1 mm
-7 -8
ON ON
ON OFF
OFF ON
OFF OFF
OFF ON
ON OFF
ON ON
OFF OFF
CÓPIA NÃO CONTROLADA
Adjust away from the leading edge
Stapling Position
L
Folding Position
Example 2: L= 0.75 mm
Adjustment
(0.25 mm/ step)
+3
+2
+1
0
-1
-2
-3
Do not use
44
Mark
B546R559.WMF
SM