Ricoh B291 Service Manual page 803

Communication Switch 16
No FUNCTION
0 Not used
1 Optional G3 unit (G3-2)
0: Not installed
1: Installed
2 Not used
3 Select PSTN connection
0: Off
1: On
4-7 Not used
Communication Switch 17
No FUNCTION
0 SEP reception
0: Disabled
1: Enabled
1 SUB reception
0: Disabled
1: Enabled
2 PWD reception
0: Disabled
1: Enabled
3-6 Not used
7 Action when there is no box
with an F-code that matches
the received SUB code
0: Disconnect the line
1: Receive the message
(using normal reception mode)
Communication Switch 18 - Not used (do not change the settings)
Communication Switch 19 - Not used (do not change the settings)
Communication Switch 1A - Not used (do not change the settings)
SM
CÓPIA NÃO CONTROLADA
Do not change the settings.
Change this bit to 1 when installing the first optional
G3 unit.
This switch enables the G3-2.
0: Off, no connection
1: Recognizes and enables G3-2.
This switch can be used only after G3-2 has been
installed.
Do not change the settings.
0: Polling transmission to another maker's machine
using the SEP (Selective Polling) signal is disabled.
0: Confidential reception to another maker's
machine using the SUB (Sub-address) signal is
disabled.
0: Disables features that require PWD (Password)
signal reception.
Do not change the settings.
Change this setting when the customer requires.
65
CÓPIA NÃO CONTROLADA
BIT SWITCHES
SP No. 1-104-023
COMMENTS
SP No. 1-104-024
COMMENTS
B779