Ricoh B291 Service Manual page 342

Table of Contents

SERVICE PROGRAM MODE TABLES

These SPs total the finishing methods. The finishing method is specified by the

application.

These SPs total finishing methods for copy jobs only. The finishing method is

specified by the application.

These SPs total finishing methods for fax jobs only. The finishing method is

specified by the application.

Note: Finishing features for fax jobs are not available at this time.

These SPs total finishing methods for print jobs only. The finishing method is

specified by the application.

These SPs total finishing methods for scan jobs only. The finishing method is

specified by the application.

Note: Finishing features for scan jobs are not available at this time.

These SPs total finishing methods for jobs output from within the document

server mode screen at the operation panel. The finishing method is specified

from the print window within document server mode.

These SPs total finishing methods for jobs executed by an external application,

over the network. The finishing method is specified by the application.

B291/B295/B296/B297

CÓPIA NÃO CONTROLADA

Number of jobs started in Sort mode. When a stored copy job is set for

Sort and then stored on the document server, the L: counter

increments. (See SP8066 1)

Number of jobs started out of Sort mode.

Number of jobs started in Staple mode.

Number of jobs started in Booklet mode. If the machine is in staple

mode, the Staple counter also increments.

Number of jobs started In any mode other than the Booklet mode and

set for folding (Z-fold).

Number of jobs started in Punch mode. When Punch is set for a print

job, the P: counter increments. (See SP8064 6.)

Reserved. Not used.

CÓPIA NÃO CONTROLADA

[0~9999999/ 0 / 1]

Chapters

Table of Contents