Sp5-Xxx: Mode - Ricoh B291 Service Manual

SP5-xxx: Mode

5024* mm/inch Display Selection
Selects the unit of measurement.
After selection, turn the main power switch off and on.
Operation Panel Bit SW
5044*
5045 Accounting Counter
Selects the counting method if the meter charge mode is enabled with SP5-930-001.
Note: You can change the setting only one time.
[0 to 1/ 1]
0: Development counter. Shows the total counts for color (Y,M,C) and black (K).
1: Paper counter. Shows the total page counts for: Color Total, Black Total, Color
Copies, Black Copies, Color Prints, Black Prints.
5051 Toner Refill Detect Display
This SP switches on/off the message that prompts the operator when it is necessary
to replenish toner in the machine.
ON: Message displayed (Default)
OFF: Message not displayed
5055 Display IP add
Switches the banner display of the IP address off and on. (Default: *Off)
[OFF] ON
For example, if this SP is switched on, the IP address will be displayed below "Ready"
while the printer is in standby mode:
Ready
169.254.187.055
A3/DLT Double Count
5104*
Specifies whether the counter is doubled for A3/DLT. "Yes" counts except from the
bypass tray. When "Yes" is selected, A3 and DLT paper are counted twice, that is A4
x2 and LT x2 respectively.
5106* Density Level Setting
Selects the image density level used in ADS mode.
Example: If you set SP5106 6 to "2": Pressing the Auto Image Density key toggles
the display off and manual notch 2 is selected.
Adjust this SP if the customer cannot attain clean copies after performing automatic
density adjustment
5112 Non-Std. Paper Sel.
Determines whether a non-standard paper size can be input for the universal
cassette trays (Tray 2, Tray 3)
[0~1/1]
0: No
1: Yes. If "1" is selected, the customer will be able to input a non-standard paper size
using the UP mode.
SM
CÓPIA NÃO CONTROLADA
SERVICE PROGRAM MODE TABLES
0: Europe/Asia (mm), 1: North America (inch)
DFU
Display IP Address
[1~7 / 4 / 1 notch per step]
5-35
CÓPIA NÃO CONTROLADA
B291/B295/B296/B297