Ricoh B291 Service Manual page 788

BIT SWITCHES
I-fax Switch 02
No FUNCTION
0 RX Text Mail Header Processing
This setting determines whether the header information is printed with text e-mails
when they are received.
0: Prints only text mail.
1: Prints mail header information attached to text mail.
• When a text mail is received with this switch On (1), the "From" address and
"Subject" address are printed as header information.
• When a mail with only binary data is received (a TIFF-F file, for example), this
setting is ignored and no header is printed.
1 Output from Attached Document at E-mail TX Error
This setting determines whether only the first page or all pages of an e-mail
attachment are printed at the sending station when a transmission error occurs. This
allows the customer to see which documents have not reached their intended
destinations if sent to the wrong e-mail addresses, for example.
0: Prints 1st page only.
1: Prints all pages.
2-3 Text String for Return Receipt
This setting determines the text string output for the Return Receipt that confirms the
transmission was received normally at the destination.
00: "Dispatched"
Sends from PC mail a request for a Return Receipt. Receives the Return Receipt with
"dispatched" in the 2nd part:
Disposition: Automatic-action/MDN-send automatically; dispatched
The "dispatched" string is included in the Subject string.
01: "Displayed"
Sends from PC mail a request for a Return Receipt. Receives the Return Receipt with
"displayed" in the 2nd part:
Disposition: Automatic-action/MDN-send automatically; displayed
The "displayed" string is included in the Subject string.
10: Reserved
11: Reserved
NOTE: A mail requesting a Return Receipt sent from an IFAX with this switch set to
"00" (for "dispatched") received by Microsoft Outlook 2000 may cause an error.
If any setting other than "displayed" (01) causes a problem, change the setting
to "01" to enable normal sending of the Return Receipt.
4 Media accept feature
This setting adds or does not add the media accept feature to the answer mail to
confirm a reception.
0: Does not add the media accept feature to the answer mail
1: Adds the media accept feature to the answer mail.
NOTE: Use this bit switch if a problem occurs when the machine receives an answer
mail, which contains the media accept feature field.
5-6 Not Used
B779
CÓPIA NÃO CONTROLADA
50
CÓPIA NÃO CONTROLADA
SP No. 1-102-003
COMMENTS
SM