Installation - Ricoh B291 Service Manual

SCANNER ACCESSIBILITY OPTION (B815)

1.20.2 INSTALLATION

This option should be pre-installed at the service center or factory and the final
installation should be done at the work site.
General Requirements
• Install the scanner on a solid base.
• Do not install the scanner in an area where it can fall when the ARDF cover is
opened.
• Install the scanner in an area that allows easy access for operation.
• Ask the customer about their requirements before you install the unit.
Specific Requirements
• The scanner unit cable should not touch the floor.
• The cables should not hang free where they can become entangled with other
equipment or furniture such as a wheelchair.
• The unit should be positioned within 380 to 1220 mm (1.3 to 4 ft.) above the floor.
• The gap between the scanner and the main unit on the left, right, or rear should
not be more than 250 mm (9.8 in.)
B291/B295/B296/B297
CÓPIA NÃO CONTROLADA
Gap less than 250 mm (9.8")
Gap less than 250 mm (9.8")
Height: 380-to 1200 mm (1.3 to 4 ft.)
1-78
CÓPIA NÃO CONTROLADA
Gap less than 250 mm (9.8")
B815I119.WMF
B815I120.WMF
SM