Ricoh B291 Service Manual page 91

[B]
3. Install the front joint bracket [A] (2 screws - M4 x 14) and rear joint bracket [B]
(! x 2 M4 x 14).
4. Install the grounding plate [C] to the finisher (! x 2 M3 x 8).
NOTE: Use the screw removed in step 2 and the screw from the accessory
box.
5. Open the front door [D] then pull the locking lever [E].
6. Align the finisher on the joint brackets, and lock it in place by pushing the
locking lever.
7. Secure the locking lever (! x 1 knob screw M3 x 8).
8. Close the front door.
9. Install the copy tray [F] (! x 1 knob screw M4 x 10).
SM
CÓPIA NÃO CONTROLADA
[A]
[F]
B408I503.WMF
1-61
CÓPIA NÃO CONTROLADA
1000 SHEET FINISHER (B408)
[D]
B291/B295/B296/B297
[E]
[C]
B408I201.WMF