Iob Dip Switch Settings (Sw101) - Ricoh B291 Service Manual

IOB DIP Switch Settings (SW101)

1. The position of SW 1 determines the engine speed. This switch should be UP
(ON) for the B291/B296 (35 cpm) or DOWN (OFF) for the B295/B297 (45 cpm)
NOTE: Move a switch UP to ON or DOWN to OFF.
2. SW 2, 3, 4, and 5 should all be DOWN (OFF). Do not change these settings.
This information is only for reference:
SW
2 Switches off jam detection.
3 Engine program recovery.
4 Print output for debugging.
5 Switches off SC detection.
3. SW 6, 7, 8 should be set for the area where the machine is used and serviced.
6 7 8
OFF OFF OFF
ON OFF OFF
OFF ON OFF
ON OFF ON
ON ON OFF
OFF ON ON
ON ON ON
ON: Up
OFF: Down
SM
CÓPIA NÃO CONTROLADA
If set to ON
Location
Japan
North America
Europe
Taiwan
Asia
Korea
Not used
3-85
CÓPIA NÃO CONTROLADA
PRINTED CIRCUIT BOARDS
B291/B295/B296/B297