Booklet Stapler Unit - Ricoh B291 Service Manual

Table of Contents

2.12 BOOKLET STAPLER UNIT

There are two staplers whose positions are fixed.

When the jogger fences finish aligning the last sheet, the jogger fences stay at the

aligning positions and stapling starts. The two staplers do not operate at the same

time, the rear stapler operates first, then the front one. This is for the following

• To prevent paper from becoming waved in the area between the two stapled

• To minimize necessary electric power.

The staple hammer HP switch in each stapler detects a stapling cycle and the

staple end sensor detects the presence of staples in the cartridge.

The stapler unit, including the two staplers, can be pulled out to enable staple

cartridge replacement or jam removal. The stapler unit set sensor detects when the

stapler unit is back in the right position.

CÓPIA NÃO CONTROLADA

BOOKLET STAPLER UNIT

B546D575.PCX

Table of Contents