Pre-Installation; On-Site Installation - Ricoh B291 Service Manual

Pre-installation

• Remove Short Scanner I/F Cable
• Connect the Long Scanner Cable to the Copier
• Install Anti-Static Springs on the Operation Panel
• Replace the Board Shield Plates

On-Site Installation

• Move the Scanner Unit to Its Accessible Location
• Remove the Horizontal Arm
• Connect the Long Scanner I/F Cable to the Copier
• Replace the Front Rubber Feet with the Adjustment Screws
• Connect the Scanner
Pre-installation
Remove Short Scanner Cable
1. If the ARDF is attached, remove it.
2. Remove:
[A]: Rear scale (! x3)
[B]: Left scale and exposure glass (! x2)
3. Remove scanner rear cover [C] (! x2).
SM
CÓPIA NÃO CONTROLADA
SCANNER ACCESSIBILITY OPTION (B815)
1-79
CÓPIA NÃO CONTROLADA
[B]
[A]
B815I101.WMF
[C]
B815I103.WMF
B291/B295/B296/B297