Ricoh B291 Service Manual page 349

8221 ADF Org Feeds
These SPs count the number of pages fed through the ADF for front and
backside scanning.
8221 1 Front
8221 2 Back
• When 1 sheet is fed for duplex scanning the Front count is 1 and the Back count
is 1.
• If a jam occurs during the job, recovery processing is not counted to avoid double
counting. In addition, the pages are not counted if the jam occurs before the first
sheet is output.
8231 Scan PGS/Mode
These SPs count the number of pages scanned by each ADF mode to
determine the workload on the ADF.
8231 1 Large Volume
8231 2 SADF
8231 3 Mixed Size
8231 4 Custom Size
8231 5 Platen
• If the scan mode is changed during the job, for example, if the user switches
from ADF to Platen mode, the count is done for the last selected mode.
• The user cannot select mixed sizes or non-standard sizes with the fax application
so if the original's page sizes are mixed or non-standard, these are not counted.
• If the user selects "Mixed Sizes" for copying in the platen mode, the Mixed Size
count is enabled.
• In the SADF mode if the user copies 1 page in platen mode and then copies 2
pages with SADF, the Platen count is 1 and the SADF count is 3.
SM
CÓPIA NÃO CONTROLADA
Number of front sides fed for scanning:
With an ADF that can scan both sides simultaneously, the Front side
count is the same as the number of pages fed for either simplex or
duplex scanning.
With an ADF that cannot scan both sides simultaneously, the Front
side count is the same as the number of pages fed for duplex front side
scanning. (The front side is determined by which side the user loads
face up.)
Number of rear sides fed for scanning:
With an ADF that can scan both sides simultaneously, the Back count
is the same as the number of pages fed for duplex scanning.
With an ADF that cannot scan both sides simultaneously, the Back
count is the same as the number of pages fed for duplex rear-side
scanning.
Selectable. Large copy jobs that cannot be loaded in
the ADF at one time.
Selectable. Feeding pages one by one through the
ADF.
Selectable. Select "Mixed Sizes" on the operation
panel.
Selectable. Originals of non-standard size.
Book mode. Raising the ADF and placing the original
directly on the platen.
5-89
CÓPIA NÃO CONTROLADA
SERVICE PROGRAM MODE TABLES
[0~9999999/ 0 / 1]
[0~9999999/ 0 / 1]
B291/B295/B296/B297