Finisher Main Board; Punch Hole Position Adjustment - Ricoh B291 Service Manual

FINISHER MAIN BOARD

1.15 FINISHER MAIN BOARD
1. Rear cover (
2. Main PCB [A] ( x 6, All )

1.16 PUNCH HOLE POSITION ADJUSTMENT

To adjust the position of the punch holes in the paper feed direction, use the
appropriate SP mode.
To adjust the horizontal position of the holes, use the spacers provided with the
punch unit.
1. Rear cover (
2. Punch unit [A] ( x3,  x5)
3. Spacers [B]
The punch position can be
adjusted by up to 4 mm using
combinations of the 3 spacers
provided with the finisher.
B545
CÓPIA NÃO CONTROLADA
1.1.1)
1.1.1)
[B]
CÓPIA NÃO CONTROLADA
[A]
12
B352R206.WMF
[A]
B352R119.WMF
SM