Test Pattern Printing: Sp2-902; Test Pattern Table (Sp2-902-2: Ipu Test Print) - Ricoh B291 Service Manual

5.2.4 TEST PATTERN PRINTING: SP2-902

NOTE: Always print a test pattern to confirm correct operation of the machine.
1. Enter the SP mode and select SP2-902.
2. Press or .
• IPU Test Print
• Test Pattern
3. Enter the number for the test pattern that you want to print and press
the tables below.)
4. When you are prompted to confirm your selection, press Yes. This selects the
test pattern for printing.
5. Press Copy Window to open the copy window and then select the settings for
the test print (paper size, etc.)
6. Press Start twice. (Ignore the "Place Original" messages) to start the test
print.
7. Press SP Mode (highlighted) to return to the SP mode display.

Test Pattern Table (SP2-902-2: IPU Test Print)

No. Test Pattern
0 None
1 Vertical Line (1-dot)
2 Horizontal Line (1-dot)
3 Vertical Line (2-dot)
4 Horizontal Line (2-dot)
5 Alternating Dot Pattern
6 Grid Pattern (1-dot)
7 Vertical Strips
SM
CÓPIA NÃO CONTROLADA
SERVICE PROGRAM MODE TABLES
No. Test Pattern
8 Grayscale (Horizontal)
9 Grayscale (Vertical)
10 Cross Pattern
11 Cross Shape
12 Argyle Pattern
13 Cross Pattern (256)
14 Cross Pattern (64)
5-109
CÓPIA NÃO CONTROLADA
. (See
B291/B295/B296/B297