Ricoh B291 Service Manual page 818

BIT SWITCHES
IP Fax Switch 01
No.
IP Fax delay level setting
Selects the acceptable delay level.
Level 0 is the highest quality
0-3 Default is "0000" (level 0).
IP Fax preamble wait time setting
4-7
IP Fax Switch 02
No.
0 IP Fax bit signal reverse setting
0: Maker code setting
1: Internal bit switch setting
1 IP Fax transmission speed setting
0: Modem speed
1: No limitation
2 SIP transport setting
0: TCP
1: UDP
3-7 Not used
B779
CÓPIA NÃO CONTROLADA
FUNCTION
FUNCTION
CÓPIA NÃO CONTROLADA
COMMENTS
Bit 3 Bit 2
0 0
0 0
0 0
0 0
Selects the preamble wait time.
[00 to 0f]
There are 16 values in this 4-bit binary switch
combination.
Waiting time: set value level x 100 ms
Max: 0f (1500 ms) Min: 00 (No wait time)
The default is "0000" (00H).
COMMENTS
When "0" is selected, the bit signal reverse
method is decided by the maker code.
When "1" is selected, the bit signal reverse
method is decided by the internal bit switch.
NOTE: When communicating between IP Fax
devices, LSB first is selected.)
Selects the transmit speed for IP Fax
communication.
This bit switch sets the transport that has
priority for receiving IP Fax data.
This function is activated only when the
sender has both TCP and UDP.
Do not change these settings.
80
SP No. 1-111-002
Bit 1 Bit 0
0 0 Level 0
0 1 Level 1
1 0 Level 2
1 1 Level 3
SP No. 1-111-003
SM