SENSOR BOARD
3.35 SENSOR BOARD
1. Before removing the sensor board, you
should remove:
– Rear cover (☛ 3.12)
– Shield Engine Ass'y (☛ 3.31)
2. Release the four snap-fits securing the
sensor board and unplug the single
connector from the main board.
3.
Remove the sensor board.
3.36 MAIN BOARD
1. Before removing the main board, you should remove:
– Rear cover (☛ 3.12)
– Shield Engine Ass'y (☛ 3.31)
2. Remove the four screws and all nine
connectors from the main board.
3.
Remove the board.
3-24
10 October, 2002
H911R962.WMF
H911R961.WMF