Input Check (Sp5-803); Input Check Table - Ricoh Aficio 1013 Service Manual

USING SERVICE PROGRAM MODE

5.1.3 INPUT CHECK (SP5-803)

1. Access SP5-803.
2. Select the number that will access the switch or sensor you wish to check (see
the table below).
3. Check the status of the sensor or switch.
4. If you wish to check the signal during a copy cycle, select the required copy
mode, then press &.
5. The LCD panel will display "00H" or "01H", as shown below.
The following table shows the meaning of the value displayed for each switch and
sensor.

Input Check Table

Number
1 DF registration sensor
3 DF original set sensor
12 Scanner HP sensor
13 Platen cover sensor
15 Registration sensor
16 Exit Sensor
17 Front door switch
Right door switch
18
23 Mechanical counter sensing
Paper end sensor (standard
35
tray)
Paper end sensor (optional
44
paper tray unit)
Bypass paper end sensor
88
(100-sheet bypass)
B044/B045/B046
Input Check
Code:
Input Check
Description
5-24
0
B046M005.WMF
Code: 0
B046M010.WMF
00H
No paper
No paper
Not at home
Platen cover closed
No paper
No paper
Door closed
Door closed
Counter not installed
Paper not detected.
No paper
No paper
Reading
01H
Paper detected
Paper detected
At home
Platen cover open
Paper detected
Paper detected
Door open
Door open
Counter installed
Paper detected.
Paper detected
Paper detected
SM